Webdav; Web Service - Thecus N2810 User Manual

Item
TFTP
NICs
Port
Share Folder
Folder Permission

WebDAV

The WebDAV is an extended protocol of http(s) which allows remote access to your
NAS system.
To begin using WebDAV and WebDAV SSL, simply click enable and provide the port
number. The default port number is 9800, under normal circumstances this will not
need to be changed.
WebDAV Configuration
Item
WebDAV Service
WebDAV SSL Service
Browser View
Apply

Web Service

Description
Enables TFTP Service on the Thecus IP storage.
Choose NICs to enable port use
Specifies the port number of an incoming connection on a
non-standard port.
Select the file stored folder, it cannot be empty.
Select the folder permission
Description
Press the Enable button to activate WebDAV service and specify the
port number if it needs to change from the default value.
P.S. Port number is limited to greater than 1024 and less than 65536
Press the Enable button to activate WebDAV SSL service and specify
the port number if it needs to be changed from the default value.
P.S. The ort number is limited to greater than 1024 and less than
65536
Press the Enable button and viewing the share folder list through the
browser will be allowed
Click "Apply" to confirm the changes.
103