Thecus N2810 User Manual page 90

The Browseable setting is the same method used for setting a system share folder.
It designates whether or not this folder will be visible through web disk. You may
refer to the figure below for reference when Yes and No are selected.
The Public setting will be set the same way as the setting for the system share
folder associated with the ACL permission is. The sample above of Device Folder
"Kendo02" can be found from share folder list.
Click Apply to save your changes.
B. Activate a Stack Target
After your settings have been applied, the system will bring you back to the NAS
Stacking List window as shown below. There is one stack target device that has
been attached into this stack master.
With this newly attached stack target device, you will see the information
displayed .
In general, clicking on associated stack target, if the attached stack target device
has been used by another Thecus NAS as stack target volume, then the status
Mounted will be displayed and system will recognize it straight away and display
its capacity. Otherwise, the Connected will be displayed in Status. Now click on
associated stack target and you will see the File System Format tab appear.
Click on it to proceed with formatting.
90