Spin Down - Thecus N2810 User Manual

may also like to perform a disk SMART test, simply click "Self Test" to start the
SMART test. The result is only for reference and the system will not take any action
from its results.
There are "Fast Test" or 'Full test" can be choose from.
Bad Block Scan:
1. Select a disk from the list.
2. Click on Start Scan Block button to perform.
3. Click again to stop bad block scanning.

Spin Down

For disks installed into system, there is default 30 minutes to spin down if no disk
activities been detected. However, the spin down duration can be either turn off or
extend. Select from drop down option to make choice.
78