Iso Mount - Thecus N2810 User Manual

D. Stack Target ACL
Go to the System Folder section with associated Device Folder created by NAS
stacking. The ACL settings will be exactly the same as the system folder that you
may have setup previously.
E. Reconnect a Stack Target
This is used to enable stack target devices that may have been disconnected due to
a power outage or a disconnected network. When this happens, the Reconnect
button will become available. To attempt to reconnect the stack target, click
Reconnect.

ISO Mount

The ISO Mount feature is a very useful tool from the Thecus products. With it, users
can mount an ISO file and have the export name display all the details from the
mounted ISO file.
From the Control Panel, the ISO Mount feature is located under "Storage".
Select the ISO Image function and the ISO Image Mounting window will appear as
shown below.
A. Add an ISO file
Click on Add button and the available system share will appear.
To mount the new ISO file, select one ISO file from the associated share list and
input the desired mounting name into the "Mount Folder Name" field. Click "Mount"
to confirm the completion of the mounting.
92