Hardware Control - Thecus N2810 User Manual

See the following table for a detailed description of each item.
UPS Setting
Item
UPS Service
Remote UPS Monitoring
Manufacturer
Model
Battery Status
Power
First notification (sec)
Subsequent notifications (sec)
Shutdown percentage (%)
Apply

Hardware Control

The system buzzer can be Enable/Disable by clicking the check box. Check to
enable system buzzer while any error occurred or disable to mute the system.
Description
Enable or disable UPS monitoring.
Checked to enable remote UPS monitoring. And
input the IP address of the NAS that the UPS device
is connected to via USB.
Choose the UPS manufacturer from the
dropdowns.
Choose the UPS model number from the
dropdowns.
Current status of the UPS battery
Current status of the power being supplied to the
UPS
Delay between power failure and first notification
in seconds.
Delay between subsequent notifications in
seconds.
Amount of UPS battery remaining before system
should auto-shutdown.
Press Apply to save your changes.
30