Thecus N2810 User Manual page 39

Quality of Service Configuration
Enable the Rule
Network Interface
Service List
User Defined
Service Name
Protocol and Ports
Protocol
Ports
Guaranteed (KB/s)
Maximum (KB/s)
To modify, delete or change priority of created QoS service, select desired service
from service list then click required activities. Carry on for necessary modification
to modify by click "Edit" or click on "Move Up" or "Move Down" to change priority.
Delete the rule button can be found on left hand bottom corner after go into "Edit"
screen.
Checked the box to enable defined rule.
Select network interface from drop down list.
Select desired service to have QoS served
Other than pre-defined service list, user defined service is allowed.
Input user defined service name
Input user defined protocol from drop down list and associated ports
will be used
List associated protocol of selected service.
List associated port number of selected service.
Input MUST of throughput for associated service.
Input maximum of throughput for associated service
39