Connecting And Disconnecting A Power Cable To And From The Main Device; Ac Power Cable (Ac Power And Ac (Poe) Models) - Alaxala AX3800S Hardware Instruction Manual

4. Installation of the Components
4.5 Connecting and disconnecting a power cable to and from the
main device
This section describes how to connect and disconnect a power cable to and from the main
device.
For the AC power and AC (PoE) models and the redundant power model with the AC
power supplies, use an AC power cable.
For the DC model and the redundant power model with DC power supplies, use the DC
power cable.
Follow the procedures below to connect or disconnect the power cable.

4.5.1 AC power cable (AC power and AC (PoE) models)

Make sure to connect the device to a grounded outlet. Not connecting the grounded
outlet to the switch can cause electric shocks, as well as cause failures due to
electrical noise.
NOTE
The figures below show the AC model with the external power unit (EPU). The
same procedures are applicable to the AC (PoE) model with the EPUs.
NOTE
When the device is mounted in a rack, fasten the power cable with the cable holder
of the rack in order to avoid stress on the cable connection part.
(1) Installing
[Step 1]
Connect the accessory power cable to the AC power connector on the back face of the
EPU.
Figure 4-13 Attaching the power cable
(1) Standby power connector (with protective cap)
(2) Cable clamp
146