Adf Unit - Brother MFC-8460N Servise Manual

5.1.9 ADF Unit

(1) Remove the four cup S M3x6 Taptite screws, remove the FG harness and then remove the
Shield cover.
Taptite, cup S M3x6
Taptite, cup S M3x6
(2) Remove the cup S M3x6 Taptite screw, remove the ADF FG harness and FB FG harness.
(3) Disconnect the Connector from the Driver PCB.
(4) Disconnect the two Connectors from the Main PCB.
Driver PCB
Connecto r
(ADF motor harness)
ADF FG harness
FB FG harness
Taptite, cup S M3x6
Shield cove r
FG harness
Connectors
(ADF relay harness)
Main PCB
<Left side>
<Left side>
Fig. 5-18
Fig. 5-19
5-31
Driver PCB
Main PCB
Confidential