Brother MFC-8460N Servise Manual page 177

(4) Remove the Screw pan (S/P washer) M3.5x6 screw, and then remove the NCU shield plate.
(5) Disconnect the connector of the NCU harness.
N CU shield plate
Screw p an (S/P washer)
M3.5x6
N CU harness
(6) Remove the two cup S M3x6 Taptite screws, and then remove the NCU PCB ASSY.
Taptite, cup S M3x6
N CU PCB ASSY
Taptite, cup S M3x6
Fig. 5-103
Fig. 5-104
5-76
N CU PCB
Confidential