Fuser Unit - Brother MFC-8460N Servise Manual

5.1.62 Fuser Unit

(1) Remove the bind B M4x16 Taptite screw. Release the Hooks in the order of the arrows 1a,
1b and 1c, and remove the FU harness cover 1.
(2) Remove the Heater terminal L and Heater terminal S from the Fuser unit while holding the
Fuser unit.
1b
1a
Hooks
Fig. 5-109
Fuser unit
Fig. 5-110
1c
Taptite, bind B M4x16
FU harness cover 1
Heater terminal S
5-79
<Back side>
Heater terminal L
Confidential