Document Cover Sensor - Brother MFC-8460N Servise Manual

5.1.43 Document Cover Sensor

(1) Disconnect the Connector from the Document cover sensor.
(2) Pull the Document cover sensor downwards to remove it from the Document cover LGL
ALFB while pressing the Hook of the Document cover sensor.
Document cover LGL ALFB
Boss
Document cover senso r
5.1.44 Eject Roller B4
(1) Remove the four Eject rollers B4 and two Pressure roller shaft S from the Document cover
LGL ALFB.
Document cover LGL ALFB
Assembling Notes
When assembling the Eject rollers B4, ensure that the direction of each roller is
correct as shown in the figure above.
<Back side>
Connecto r
1
Pressure roller shaft S
Hoo k
2
2
Document cover senso r
Fig. 5-75
Eject rollers B4
Fig. 5-76
5-61
Hoo k
2
2
Eject rollers B4
Pressure roller shaft S
<Front side>
Hoo k
Confidential