Brother MFC-8460N Servise Manual page 432

Selector
No.
Compression threshold level
1 for voice signals inputted via
| the telephone line in the built-
3 in TAD operation
(Not used.)
Compression threshold level
4
for voice signals inputted via
|
the handset in the built-in TAD
6
operation (Not used.)
Impedance switching control in
7
pulse dialing (Not used.)
Prompt beep when the memory
8 area for the activity report
becomes full (Not used.)
NOTE: Selectors 1 through 6 are applicable to models equipped with built-in TADs.
NOTE: Selectors 7 and 8 are applicable only to the European versions.
- Selectors 1 through 6: Compression threshold level for voice signals inputted via the telephone line in
If voice signals inputted via the telephone line are below the level specified by these selectors, the
TAD interprets those received voice signals as no signal, compressing the recording time.
- Selector 8: Prompt beep for activity report (Not used.)
This selector determines whether or not to beep if the memory area for the activity report becomes
full, for prompting you to print out the report. (Printing it out will clear the memory area.)
WSW29
Function
the built-in TAD operation (Not used.)
App. 4-33
(Function setting 7)
Setting and Specifications
No. 1 2 3
0 0 0 :
0 0 1 :
0 1 0 :
0 1 1 :
1 0 0 :
1 0 1 :
1 1 0 :
1 1 1 :
No. 4 5 6
0 0 0 :
0 0 1 :
0 1 0 :
0 1 1 :
1 0 0 :
1 0 1 :
1 1 0 :
1 1 1 :
0: OFF
0: No
-47.0 dBm (A)
-48.5 dBm (B)
-50.0 dBm (C)
-51.5 dBm (D)
-53.0 dBm (E)
-54.5 dBm (F)
-56.0 dBm (G)
OFF (H)
-44.0 dBm (A)
-45.5 dBm (B)
-47.0 dBm (C)
-48.5 dBm (D)
-50.0 dBm (E)
-51.5 dBm (F)
-53.0 dBm (G)
OFF (H)
1: ON
1: Yes
Confidential