Brother MFC-8460N Servise Manual page 25

< Status LED indications >
The Status LED (Light Emitting Diode) will flash and change color depending on the machine status.
The LED indications shown in the table below are used in the illustrations in this chapter.
LED
Sleep Mode
Warming Up
Green
Ready
Green
Receiving Data
Yellow
Data Remaining in Memory
Yellow
Service error
Red
LED
Green Yellow
Green Yellow
Machine Status
Fig. 1-5
Red
Red
The power switch is off or the machine is in Sleep
mode.
The machine is warming up for printing.
The machine is ready to print.
The machine is either receiving data from the
computer, processing data in memory or printing
data.
Print data remains in the machine memory.
Follow the steps below.
1. Turn off the power switch.
2. Wait a few seconds, and then turn it back on and
try to print again.
If you cannot clear the error and see the same
service call indication after turning the machine
back on, please call Brother Customer Service.
1 -5
LED Status
LED is off.
LED is on.
LED is blinking.
Description
Confidential