Questions And Answers - Gigaset S820H User Manual

Hide thumbs Also See for S820H:
Table of Contents

Advertisement

Questions and answers

If you have any queries about the use of your telephone, suggested solutions are available on
the Internet at www.gigaset.com/service
The table below also lists steps for troubleshooting.
Registration or connection problems with a Bluetooth headset.
¥
¥
Reset the Bluetooth headset (see the user guide for your headset).
Delete registration data from the handset when de-registering the device (
¥
Repeat the registration process (
There is nothing on the display and the display does not react when you touch it.
1. The handset is not activated.
¥
Press and hold a.
2. The battery is flat.
¥
Charge or replace the battery (
3. The keypad and display lock is activated.
¥
Press the hash key
"
The display flashes
Base contact lost - Searching for base ...
1. The handset is outside the range of the base.
¥
Move the handset closer to the base.
2. The base is not activated.
¥
Check the base power adapter.
3. The base's range is reduced because Max. Range is activated.
¥
Deactivate Max. Range or reduce the distance between the handset and the base.
"
The display flashes
Handset not registered to any base
The handset has not yet been registered or was de-registered because an additional handset was registered
(more than six DECT registrations).
¥
Register the handset again (
The handset does not ring.
1. The ring tone is deactivated.
¥
Activate the ring tone (
2. Call divert is set. (only for Mexico)
¥
Disable call divert.
You cannot hear a ring/dialling tone from the fixed line.
The phone cord supplied has not been used or has been replaced by a new cord with the wrong pin connec-
tions.
¥
Please always use the phone cord supplied or ensure that the pin connections are correct when purchas-
ing from a retailer.
Error tone sounds after system PIN prompt.
You have entered the wrong system PIN.
¥
Repeat the process; if necessary reset the system PIN to 0000.
Forgotten system PIN.
¥
Reset the system PIN to 0000.
The other party cannot hear you.
The handset is "muted".
¥
Unmute the microphone (
en fr es
¤
 FAQ
¢
page 22).
¢
page 5).
#
and hold.
¢
page 6).
¢
page 20).
¢
page 17).
¤
 First steps for troubleshooting.
"
.
"
.
Service (Customer Care)
¢
page 23).
43

Advertisement

Table of Contents
loading

Table of Contents