(2) Use [A] or [y] to select the menu, then press [OK].
Example: select <Extended copy amount>.
QUiet mode
}-(2)
5
Change the settings.
(1) Use [A] or [y] to select the setting item, then press [OK].
Example: select <Small>.
crl Extencjecl copy amount
(1 )
Ot<
":~:et
The Print Settings
•
Quiet mode
Use this function if you want to reduce the operation noise, such as when printing at night.
~ Important
• The printing speed may be reduced compared to when this setting is set to <OFF>.
• This function may not be so effective depending on the print quality setting.
• Furthermore, certain noise, such as when the machine is preparing for printing, is not
reduced.
•
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
~
Important
Be sure to revert this setting to <OFF> after printing since it may result in lower print quality.
•
Extended copy amount
Selects the amount of image that extends off the paper when printing in Borderless (full).
W
Note
• This setting can be applied only when Copy mode selected.
• If you set <Large> for this function, the area of the image extending off the paper becomes
larger.
•
Auto cont. feed switch
If paper runs out in one paper source, paper will be fed from the other.
Chapter 9
Changing the Machine Settings
135
(2) Use [A] or [y] to select the menu, then press [OK].
Example: select <Extended copy amount>.
QUiet mode
}-(2)
5
Change the settings.
(1) Use [A] or [y] to select the setting item, then press [OK].
Example: select <Small>.
crl Extencjecl copy amount
(1 )
Ot<
":~:et
The Print Settings
•
Quiet mode
Use this function if you want to reduce the operation noise, such as when printing at night.
~ Important
• The printing speed may be reduced compared to when this setting is set to <OFF>.
• This function may not be so effective depending on the print quality setting.
• Furthermore, certain noise, such as when the machine is preparing for printing, is not
reduced.
•
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
~
Important
Be sure to revert this setting to <OFF> after printing since it may result in lower print quality.
•
Extended copy amount
Selects the amount of image that extends off the paper when printing in Borderless (full).
W
Note
• This setting can be applied only when Copy mode selected.
• If you set <Large> for this function, the area of the image extending off the paper becomes
larger.
•
Auto cont. feed switch
If paper runs out in one paper source, paper will be fed from the other.
Chapter 9
Changing the Machine Settings
135