Canon PIXMA MP830 User Manual page 141

• Auto redial
Enables/disables automatic redialing.
Redial times Specifies the maximum number of redial attempts.
Redial interval Specifies the length of time the machine waits between redial
attempts.
• TX start speed
Selects the fax sending speed.
• Color TX
When faxing color documents using the ADF, selects whether to perform automatic black &
white conversion if the recipient's fax machine does not support color faxing.
• TX report
Sets whether to print a transmission report after each transmission.
Attach TX image
• Dial tone detect
When <Print error only> or <Print for each TX> is selected,
sets whether to print the first page of the document below the
transmission report
Sets whether to send faxes after detecting the dial tone. Select <ON> to enable this feature and
avoid transmission errors caused when a fax transmission coincides with reception of an
incoming call.
• RX settings
• ECM RX
Enables/disables ECM reception.
• FAXITEL auto switch
Specifies the detailed settings when the receive mode is set to <FAX/TEL auto switch>.
Ring start time Specifies the length of time to allow the machine to judge
whether an incoming call is fax or a voice call.
Telephone ring time Specifies, in seconds, the time the machine rings for a voice
call.
Default action Sets whether to receive the fax after the specified ring time
has elapsed.
• DRPD: Set FAX ring pat.
Sets the distinctive ring pattern the machine gives off when you receive a fax call. If you
subscribe to a DRPD service, set this to match the pattern assigned by your telephone company.
This setting is only available in US and Canada.
Chapter 9 Changing the Machine Settings
139
• Auto redial
Enables/disables automatic redialing.
Redial times Specifies the maximum number of redial attempts.
Redial interval Specifies the length of time the machine waits between redial
attempts.
• TX start speed
Selects the fax sending speed.
• Color TX
When faxing color documents using the ADF, selects whether to perform automatic black &
white conversion if the recipient's fax machine does not support color faxing.
• TX report
Sets whether to print a transmission report after each transmission.
Attach TX image
• Dial tone detect
When <Print error only> or <Print for each TX> is selected,
sets whether to print the first page of the document below the
transmission report
Sets whether to send faxes after detecting the dial tone. Select <ON> to enable this feature and
avoid transmission errors caused when a fax transmission coincides with reception of an
incoming call.
• RX settings
• ECM RX
Enables/disables ECM reception.
• FAXITEL auto switch
Specifies the detailed settings when the receive mode is set to <FAX/TEL auto switch>.
Ring start time Specifies the length of time to allow the machine to judge
whether an incoming call is fax or a voice call.
Telephone ring time Specifies, in seconds, the time the machine rings for a voice
call.
Default action Sets whether to receive the fax after the specified ring time
has elapsed.
• DRPD: Set FAX ring pat.
Sets the distinctive ring pattern the machine gives off when you receive a fax call. If you
subscribe to a DRPD service, set this to match the pattern assigned by your telephone company.
This setting is only available in US and Canada.
Chapter 9 Changing the Machine Settings
139