Canon PIXMA MP830 User Manual page 18

• Operation Panel Name and Functions
(1) (2) (3) (4) (5) (6) (7) (8)
(9) (10) (11) (12)
MP8JO
(14) (16) (18) (20)
(13) (15) (1 )
(19) (21)
(23) (25) (27) (29)
(22) (24) (26) (28) (30) (31)
(1) [ON/OFF]
Turns the machine ON and OFF. Before turning ON the machine, make sure the
Document Cover is closed.
W
Note
• The machine cannot receive faxes when the power is turned OFF.
• The power cannot be turned OFF while the machine is sending or receiving a fax, or
when there are unsent faxes stored in the machine's memory.
(2) [COPY]
Switches the machine to Copy mode. Flashes when the machine is turned on.
(3) [FAX]
Switches the machine to Fax mode.
(4) [SCAN]
Switches the machine to Scan mode. This button is used when the machine is connected
to a computer. (Refer to the Scan Guide.)
(5) [MEMORY CARD]
Switches the machine to Memory card mode.
(6) In Use/Memory Lamp
Flashes when the telephone line is in use. Lights when there are documents stored in the
machine's memory.
(7) Alarm Lamp
Lights or flashes orange, when an error occurs, or when paper or ink has run out.
(8) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operation status.
(9) [Menu]
Used to display menus.
(10) [Settings]
Use to configure the page size, media type, and image correction settings.
(11) Numeric Buttons
Enter numerical values such as the number of copies, as well as fax/telephone numbers
and characters.
(12) [Stop/Reset]
Cancels operations. If this button is pressed during printing, the machine aborts printing.
(13) One-Touch Speed Dial Key
Push these buttons to dial pre-registered fax/telephone numbers or group.
16
Before Printing Chapter 1
• Operation Panel Name and Functions
(1) (2) (3) (4) (5) (6) (7) (8)
(9) (10) (11) (12)
MP8JO
(14) (16) (18) (20)
(13) (15) (1 )
(19) (21)
(23) (25) (27) (29)
(22) (24) (26) (28) (30) (31)
(1) [ON/OFF]
Turns the machine ON and OFF. Before turning ON the machine, make sure the
Document Cover is closed.
W
Note
• The machine cannot receive faxes when the power is turned OFF.
• The power cannot be turned OFF while the machine is sending or receiving a fax, or
when there are unsent faxes stored in the machine's memory.
(2) [COPY]
Switches the machine to Copy mode. Flashes when the machine is turned on.
(3) [FAX]
Switches the machine to Fax mode.
(4) [SCAN]
Switches the machine to Scan mode. This button is used when the machine is connected
to a computer. (Refer to the Scan Guide.)
(5) [MEMORY CARD]
Switches the machine to Memory card mode.
(6) In Use/Memory Lamp
Flashes when the telephone line is in use. Lights when there are documents stored in the
machine's memory.
(7) Alarm Lamp
Lights or flashes orange, when an error occurs, or when paper or ink has run out.
(8) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operation status.
(9) [Menu]
Used to display menus.
(10) [Settings]
Use to configure the page size, media type, and image correction settings.
(11) Numeric Buttons
Enter numerical values such as the number of copies, as well as fax/telephone numbers
and characters.
(12) [Stop/Reset]
Cancels operations. If this button is pressed during printing, the machine aborts printing.
(13) One-Touch Speed Dial Key
Push these buttons to dial pre-registered fax/telephone numbers or group.
16
Before Printing Chapter 1