Canon PIXMA MP830 User Manual page 155

(2) Use [A] or ['Y] to select <Deep cleaning> and then press [OK].
The confirmation screen is displayed.
VI
r,Aalntenance
NozzIe check
OK ":~:et
(3) Use [A] or ['Y] to select <Yes> and then press [OK].
The machine starts the Print Head deep cleaning.
IJDeep
cleaning
requires
a lotOfit:l~~;~ontinue?
(3)
~
Important
The process takes about 90 seconds to complete, so simply wait until the Alarm Lamp stops
flashing.
3
Check the status of the Print Head.
(1) Print the nozzle check pattern to verify that the Print Head nozzles are clean.
See "Printing the Nozzle Check Pattern" on page 149.
When one specific color only does not print, see "Replacing an Ink Tank" on page 142.
(2) If the problem remains, turn off the machine's power for at least 24 hours, and perform
deep cleaning of the Print Head again.
(3) If the problem still remains, the Print Head may be damaged. Contact the Canon
Customer Care Center
• Aligning Print Head automatically
If the ruled lines are shifted after running the Print Head maintenance, align the Print Head.
There are two ways to align the Print Head, automatic or manual. First, try adjusting the Print
Head automatically. If the automatic Print Head alignment does not work or if you wish, you can
adjust the Print Head manually. See "Adjusting the Print Head Manually" on page 165.
W
Note
• The Cassette does not feed paper for aligning the Print Head. Load paper in the Auto
Sheet Feeder.
• Ensure that the Inner Cover is closed.
1
Press [ON/OFF] to turn on the machine.
See "Turning on the Machine" on page 18.
2
Execute automatic Print Head alignment.
(1) Display the Maintenance screen.
See "Performing Maintenance" on page 149.
Chapter 10 Routine Maintenance 153
(2) Use [A] or ['Y] to select <Deep cleaning> and then press [OK].
The confirmation screen is displayed.
VI
r,Aalntenance
NozzIe check
OK ":~:et
(3) Use [A] or ['Y] to select <Yes> and then press [OK].
The machine starts the Print Head deep cleaning.
IJDeep
cleaning
requires
a lotOfit:l~~;~ontinue?
(3)
~
Important
The process takes about 90 seconds to complete, so simply wait until the Alarm Lamp stops
flashing.
3
Check the status of the Print Head.
(1) Print the nozzle check pattern to verify that the Print Head nozzles are clean.
See "Printing the Nozzle Check Pattern" on page 149.
When one specific color only does not print, see "Replacing an Ink Tank" on page 142.
(2) If the problem remains, turn off the machine's power for at least 24 hours, and perform
deep cleaning of the Print Head again.
(3) If the problem still remains, the Print Head may be damaged. Contact the Canon
Customer Care Center
• Aligning Print Head automatically
If the ruled lines are shifted after running the Print Head maintenance, align the Print Head.
There are two ways to align the Print Head, automatic or manual. First, try adjusting the Print
Head automatically. If the automatic Print Head alignment does not work or if you wish, you can
adjust the Print Head manually. See "Adjusting the Print Head Manually" on page 165.
W
Note
• The Cassette does not feed paper for aligning the Print Head. Load paper in the Auto
Sheet Feeder.
• Ensure that the Inner Cover is closed.
1
Press [ON/OFF] to turn on the machine.
See "Turning on the Machine" on page 18.
2
Execute automatic Print Head alignment.
(1) Display the Maintenance screen.
See "Performing Maintenance" on page 149.
Chapter 10 Routine Maintenance 153