Canon PIXMA MP830 User Manual page 227

Windows® MP Drivers Installation
• A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to
connect your machine to a computer.
• The screens below refer to Windows XP Service Pack 2 installation.
Screens may differ depending on the operating system you arc using.
• For Windows XP or Windows 2000, log on to Windows as a member of the Administrators
group before continuing.
• Before installing the driver, disable all anti-vims programs and automatically loading
programs.
• If you have an earlier version of the MultiPASS Suite software installed on your computer,
unin tall this version before installing the new version. For instructions on un installation,
see the guides for that version of MultiPASS Suite.
o
Turn OFF the machine.
1. Press the [ON/OFF].
2. Be sure [COPY] stops flashing and all the lamps on the Operation Panel are
off.
f} Turn the computer on and start Windows.
A
IMPORTANT
(fyou see the Found New Hardwa"e Wiza"d, turn off the machine. Remove the USB
cable connected to your computer. Next, click Cancel. Then proceed from step 3 to
install the MP Drivers.
Ci'
Read the License Agreement and click [Yes]. Follow the
on-screen instructions to install the software. If a message
asking for your confirmation to restart your computer
appears, click [OK].
o
When the Printer Connection screen appears, ensure that
the machine is connected to the computer with the USB
cable, then turn the machine ON. The software will begin
identifying the printer port being used.
A
IMPORTANT
If you cannot proceed to the next procedure after three minuets, refer to "Trouble-
shooting" instructions in the User:\ Guide.
• Insert the Setup Software
&
User's Guide CD-ROM. The setup
program should run automatically.
~
The setup program should run automatically. If the installer in the CD-ROM does not run
automatically, click [Start] and select [My Computer], then double-click the CD-ROM
icon.
G} Follow the on-screen instructions to register your product.
o
When the Installation completed successfully window
appears, click [Exit].
If Restart is displayed, click [Restart] to restart the system.
Now you have completed installation of the
software.
~ US Only
When the Registration Screen appears,
follow on screen instructions to register
your product. You will need you
product serial number, which is located
on the inside of the machine. Refer to
Step
1-0.
(_E'" --.J)
Installationcomptetedsuccessfully
Easy Install
~
Select [Easy Install] in order to install the MP Drivers, On-screen Manuals, and application
softwarcs. Select [Custom Install] in order to choose the options you would like to install.
e
When the main menu appears, click [Easy Install] and follow
the on-screen instructions.
"When the list of applications to install appears, verify the
contents, click [Install], then follow the instructions on the
screen.
~
Move the cursor over items to display explanations of each application below.
Part no.
QT5-0226-VOI ©
2006 Canon Inc. Windows is a trademark of Microsoft Corporation, registered in the United States and other countries. Macintosh and Mac are trademarks of Apple Cor
Windows® MP Drivers Installation
• A printer cable is not included. You must purchase a USB cable (less than 10 ft./3 m) to
connect your machine to a computer.
• The screens below refer to Windows XP Service Pack 2 installation.
Screens may differ depending on the operating system you arc using.
• For Windows XP or Windows 2000, log on to Windows as a member of the Administrators
group before continuing.
• Before installing the driver, disable all anti-vims programs and automatically loading
programs.
• If you have an earlier version of the MultiPASS Suite software installed on your computer,
unin tall this version before installing the new version. For instructions on un installation,
see the guides for that version of MultiPASS Suite.
o
Turn OFF the machine.
1. Press the [ON/OFF].
2. Be sure [COPY] stops flashing and all the lamps on the Operation Panel are
off.
f} Turn the computer on and start Windows.
A
IMPORTANT
(fyou see the Found New Hardwa"e Wiza"d, turn off the machine. Remove the USB
cable connected to your computer. Next, click Cancel. Then proceed from step 3 to
install the MP Drivers.
Ci'
Read the License Agreement and click [Yes]. Follow the
on-screen instructions to install the software. If a message
asking for your confirmation to restart your computer
appears, click [OK].
o
When the Printer Connection screen appears, ensure that
the machine is connected to the computer with the USB
cable, then turn the machine ON. The software will begin
identifying the printer port being used.
A
IMPORTANT
If you cannot proceed to the next procedure after three minuets, refer to "Trouble-
shooting" instructions in the User:\ Guide.
• Insert the Setup Software
&
User's Guide CD-ROM. The setup
program should run automatically.
~
The setup program should run automatically. If the installer in the CD-ROM does not run
automatically, click [Start] and select [My Computer], then double-click the CD-ROM
icon.
G} Follow the on-screen instructions to register your product.
o
When the Installation completed successfully window
appears, click [Exit].
If Restart is displayed, click [Restart] to restart the system.
Now you have completed installation of the
software.
~ US Only
When the Registration Screen appears,
follow on screen instructions to register
your product. You will need you
product serial number, which is located
on the inside of the machine. Refer to
Step
1-0.
(_E'" --.J)
Installationcomptetedsuccessfully
Easy Install
~
Select [Easy Install] in order to install the MP Drivers, On-screen Manuals, and application
softwarcs. Select [Custom Install] in order to choose the options you would like to install.
e
When the main menu appears, click [Easy Install] and follow
the on-screen instructions.
"When the list of applications to install appears, verify the
contents, click [Install], then follow the instructions on the
screen.
~
Move the cursor over items to display explanations of each application below.
Part no.
QT5-0226-VOI ©
2006 Canon Inc. Windows is a trademark of Microsoft Corporation, registered in the United States and other countries. Macintosh and Mac are trademarks of Apple Cor