Using Mobile Phone; Audio Channel Open And Close - Sena SR10 User Manual

Hide thumbs Also See for SR10:

Table of Contents

6.4 Using Mobile Phone

6.4.1 For Bluetooth Wireless Connection

When the SR10 is paired with a Bluetooth headset and a

Bluetooth mobile phone, the Bluetooth headset will provide

Hands-Free Profile for your mobile phone. The SR10 redirects

mobile phone calls and two-way radio communications to the

Bluetooth headset simultaneously so that a Bluetooth headset

could be used for both the mobile phone and hand held two-way

radio.

6.4.2 For Wired Connection

Users can connect a mobile phone to the AUX2 Port by wire

in order to use Bluetooth handsfree. In this case, the SR10

combines audio from the Main Port and the AUX2 Port together

and redirects to the Bluetooth headset. For information on mobile

phones and cable compatibility, please visit support.sena.com.

As soon as incoming audio signal from the wired devices (two-

way radio, mobile phone, GPS or radar detector) is detected

by the SR10, the SR10 immediately makes a connection to the

Bluetooth headset and consequently users can hear a certain

sound. The examples of triggering audio signals are sound of

the two-way radio incoming signal, GPS voice instruction, radar

detector alarm or mobile phone ringtone. If there is no incoming

Table of Contents