Chrysler 2016 300 Owner's Manual page 96

94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
1. Look behind the seating position where you
plan to install the child restraint to find the
tether anchorage. You may need to move the
seat forward to provide better access to the
tether anchorage. If there is no top tether
anchorage for that seating position, move
the child restraint to another position in the
vehicle if one is available.
2. Rotate or lift the cover to access the anchor directly
behind the seat where you are placing the child restraint.
3. Route the tether strap to provide the most direct path
for the strap between the anchor and the child seat. If
your vehicle is equipped with adjustable rear head
restraints, raise the head restraint, and where possible,
route the tether strap under the head restraint and
between the two posts. If not possible, lower the head
restraint and pass the tether strap around the outboard
side of the head restraint.
Tether Strap Mounting
1 — Cover
3 — Attaching Strap
4. Attach the tether strap hook of the child restraint to
the top tether anchorage as shown in the diagram.
A — Tether Strap Hook
B — Tether Anchor