Chrysler 2016 300 Owner's Manual page 328

326 UNDERSTANDING YOUR INSTRUMENT PANEL
• ParkView Backup Camera Delay
When the vehicle is shifted out of REVERSE (with camera
delay turned OFF), the rear camera mode is exited and
the previously viewed screen appears again. When the
vehicle is shifted out of REVERSE (with camera delay
turned ON), the rear view image with dynamic grid lines
will be displayed for up to 10 seconds after shifting out of
"REVERSE" unless the forward vehicle speed exceeds
8 mph (12 km/h), the transmission is shifted into
"PARK" or the ignition is switched to the OFF position.
To set the ParkView Backup Camera Delay press the
"Controls" button on the touchscreen, the "settings"
button on the touchscreen, then the "Safety & Driving
Assistance" button on the touchscreen. Press the
"Parkview Backup Camera Delay" button on the touch-
screen to turn the ParkView Delay ON or OFF.
• Rain Sensing Auto Wipers
When this feature is selected and the wipers are on, the
system will automatically activate the windshield wipers
if it senses moisture on the windshield. To make your
selection, press the "Rain Sensing Auto Wipers" button
on the touchscreen, until a check-mark appears next to
setting, indicating that the setting had been selected.
• Hill Start Assist — If Equipped
When this feature is selected, the Hill Start Assist (HSA)
system is active. Refer to "Electronic Brake Control
System" in "Starting And Operating" for system function
and operating information. To make your selection, press
the "Hill Start Assist" button on the touchscreen, until a
check-mark appears next to setting, indicating that the
setting had been selected.