To Open And Close The Hood - Chrysler 2016 300 Owner's Manual

148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
forward of the rear stop. At this position, there is no
benefit to the driver by moving the seat for Easy Exit
or Easy Entry.
Each stored memory setting will have an associated Easy
Entry and Easy Exit position.
NOTE: The Easy Entry/Exit feature is not enabled when
the vehicle is delivered from the factory. The Easy
Entry/Exit feature is enabled (or later disabled) through
the programmable features in the Uconnect system. Refer
to "Uconnect Settings/Customer Programmable Fea-
tures" in "Understanding Your Instrument Panel" for
further information.

TO OPEN AND CLOSE THE HOOD

Two latches must be released to open the hood.
1. Pull the hood release lever located under the left side
of the instrument panel.
Hood Release Lever
2. Move to the outside of the vehicle and push the safety
catch to the left. The safety catch is located under the
center front edge of the hood.