Kyocera DP-750 Service Manual page 81

4. Remove the original feed belt unit from the
inserted parts of the original feed unit.
5. Remove two stop rings from the original feed belt shaft A.
6. Remove the pulley, pin and original feed holder from the
shorter shaft side.
Slide the pulley and the original feed holder at the longer
shaft side.
7. Pull out the original feed belt shaft A from the original feed
belt unit and then remove the original feed collar A.
Pulley
Original feed
holder
Original feed
collar A
Original feed belt unit
Original feed unit
Figure 1-5-3
Stop ring
Pin
Pin
Original feed
belt unit
Original feed
holder
Figure 1-5-4
3LL/3LK
Stop ring
Pulley
Original feed
belt shaft A
1-5-3