Kyocera DP-750 Service Manual page 36

3LL/3LK
Maintenance
item No.
U411 3. Press [INPUT].
Display
INPUT
4. Press the start key. Auto adjustment starts.
When automatic adjustment has normally completed, [COMPLETE] is displayed. If a problem occurs
during auto adjustment, [ERROR XX] (XX is replaced by an error code) is displayed and operation stops.
Should this happen, determine the details of the problem and either repeat the procedure from the begin-
ning, or adjust the remaining items manually by running the corresponding maintenance items.
Method: DP(FACE DOWN)
1. Place the specified original for acquiring gamma target data (P/N: 303JX57010) on the platen, and
press the start key.
2. Place the specified original for acquiring matrix target data (P/N: 303JX57020) on the platen, and press
the start key.
When normally completed, [COMPLETE] is displayed.
3. Select the item (place all originals face down).
Display
ALL
INPUT
MTF/GAMMA
MATRIX
[INPUT]
1. Select [INPUT].
2. Place a specified original (P/N: 302AC68243).
3. Press the start key. Auto adjustment starts.
[GAMMA]
1. Select [MTF/GAMMA].
2. Place a specified original (P/N: 303JX57010).
3. Press the start key. Auto adjustment starts.
[MTF/MATRIX]
1. Select [MATRIX].
2. Place a specified original (P/N: 303JX57020).
3. Press the start key. Auto adjustment starts.
When [ALL] is selected, the adjustment of [INPUT], [MTF/GAMMA] and [MATRIX] can be executed at once.
When adjusting, place the three specified originals, and then press the start key.
Set the original 303JX57020, and then place 303JX57010 and 302AC68243 in order on the top of the orig-
inal.
When automatic adjustment has normally completed, [COMPLETE] is displayed. If a problem occurs
during auto adjustment, [ERROR XX] (XX is replaced by an error code) is displayed and operation stops.
Should this happen, determine the details of the problem and either repeat the procedure from the begin-
ning, or adjust the remaining items manually by running the corresponding maintenance items.
1-3-16
Description
Description
Automatic adjustment of first page using the DP for: original size mag-
nification/leading edge timing/center line.
Description
Automatic adjustment of second page using the
DP for: original size magnification/leading edge
timing/center line, input gamma, chromatic
aberration filter, MTF filter and matrix.
Automatic adjustment of second page using the
DP for: original size magnification/leading edge
timing/center line.
Automatic adjustment of second page using the
DP for: MTF filter and input gamma.
Automatic adjustment of second page using the
DP for: matrix.
Original to be used for
adjustment (P/N)
302AC68243/303JX57010/
303JX57020
302AC68243
303JX57010
303JX57020