Table of Contents
Advertisement
BT 55e
6. Adjust the volume button - ( 5 ) or + ( 6 ) of the main unit to your desired level.
Note:
Extend the telescopic antenna (14) to its full length when listening to FM
broadcasting and gently move the unit back and forth to get the best reception
when listening to a FM program or place the unit in an open place.
USB OPERATION
1. Press SOURCE (1) button to select USB Mode.
2. Insert the USB audio file device into the USB port (17). It will show the total
number of tracks stored in the USB device.
3. The unit will start playing track one after reading out.
4. Press
/PAIR (7) button, it will show the current play time and play pause. Press
(10) to stop playing. It will show total number of USB and stop. To resume playback,
press the
/PAIR (7) button again.
Note: USB port is only for USB playback function, there is no charge function. Do not
use any USB extension cable for connection the USB device to avoid any conflict, and
that will effect the audio signal transmission. Sometimes the sound will play
intermittently.
5. Repeat Play: press REPT (3) button once to play the current track repeatedly, press
REPT (3) button once again to play all tracks repeatedly. Press REPT (3) button again
to cancel repeat play.
6. Press
(8) or
Press PRE+/+10 (4) button for favorite music selection.
Caution:
Do not use any USB extension cable for connecting the USB device to avoid any
conflict.
USB MODE
(9) button to select the favorite music.
34
flash: it will play the current track
repeatedly
light up: it will play all tracks repeatedly
Advertisement
Table of Contents
