Installation - Tait T2000 User Manual

Components of
the T2000
Radio Kit
Recommended

Installation

Tools
18
English
Installation
The T2000
II
II
• T2000
• Microphone
• Complete Cradle
• 4 Ohm Speaker (not for internal speaker models)
Installation Kit
• Two-way Hermaphroditic
Connector (1)
• Socket Receptacle (2)
• 10A 12V Blade Fuse (2)
• In-line Crimp Fuse Holder
(2)
• Portable Drill
• Centre Punch
• Drill Bits: 4mm for self-tapping screws, 6mm for nuts
and bolts
• "Pozidriv" Screwdrivers
• BNC Crimp Tool (e.g. Transradio England Duo Crimp
894)
• In-line Power Meter capable of measuring forward and
reflected power at the operating frequency of the radio
• Hammer
II
Radio kit includes the following parts:
• BNC Antenna Crimp Plug
Radio Unit
• Cradle Keys (2)
• Power Cable (5m)
Figure 1: Radio Kit Components
• Self Tapping Screw (4)
• Shakeproof Washer
(4)
• Microphone Clip Kit (1)
• Control Head Mounting
Bracket (T2020
II
T2040 only)
II
and