Getting Started - Tait T2000 User Manual

Variation in
radio setup
Switching the
radio on
Selecting a
channel
II
T2010
II
T2015

Getting Started

II
Your T2010/15
can be configured to suit the needs of your fleet.
If your T2010/15
User's guide, check with the person who programs your
radio.
To switch the radio on, turn the On/Off-Volume control
to about one third of its maximum setting. You may
need to re-adjust the volume when you receive your first
call.
When you switch your T2010/15
channel that was active when it was last used.
To check the
channel:
II
The T2010 lights
the active channel
key's LED indicator.
II
The T2015 shows
the active channel
number on its two-
character display.
is microprocessor controlled so that it
II
does not operate as described in this
II
To change to another channel:
Simply press the appropriate
Channel (
Either:
• Press the Up and Down
( /
scroll through the available
channels, or
• Press a Memory (
) key to switch directly
M2
to a preset channel.
(Memory key channels are
assigned when the radio is
programmed.)
on, it will select the
to ) key.
1 4
) arrow keys to
/
M1
English
11