Listening To Messages Using The Base Unit - Panasonic KX-TG6811E Operating Instructions Manual

Recording your greeting message
1
2
3
4
5
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
– If the message recording time (page 42)
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1
2
Playing back the greeting
message
1
2
TG68xxE(en)_1225_ver012.pdf
Downloaded from www.Manualslib.com
M N#302
MbN: "Yes" a MOKN
After a beep sounds, hold the handset
about 20 cm away and speak clearly into
the microphone (2 minutes and 30
seconds max.).
Press MnN to stop recording.
MeN
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
is set to "Greeting Only", callers'
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
M N#304
MOKN a MeN
M N#303
MeN
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
37
manuals search engine
Answering System
Listening to messages
using the base unit
When new messages have been recorded,
M N on the base unit flashes.
Press M N.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker volume
M N
Repeat message
M N Skip message
M N Stop playback
Erase currently playing
M N
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Rewinding the message
Press and hold M N until the unit plays the
desired part of the message.
R During rewinding, the base unit makes a
continuous beeping sound. Rewinding
speed may vary depending on the recorded
message.
R At the beginning of the message, the unit
plays the message at normal speed.
Fast-forwarding the message
Press and hold M N until the unit plays the
desired part of the message.
R During fast-forwarding, the base unit makes
a continuous beeping sound.
Fast-forwarding speed may vary depending
on the recorded message.
R Even if you press and hold M
end of this message is played, the next
message is played at normal speed.
2012/12/25 16:30:13
*1
N when the
37