Remote Operation - Panasonic KX-TG6811E Operating Instructions Manual

Answering System
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
– "Activate": You must enter your remote
1
2
3
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
n When the remote access code is set to
Note:
R After listening to new messages, you can
R Even if the unit makes a new message alert

Remote operation

Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit's voice
guidance prompts you to press certain dial
keys to perform different operations.
40
TG68xxE(en)_1225_ver012.pdf
Downloaded from www.Manualslib.com
message by pressing 4 to play new
messages (without entering the remote
access code).
access code (page 40) and then press 4
to play new message.
M N#338
MbN: "Remote Code" a MOKN
MbN: "Activate" or "Inactivate" a
MOKN a MeN
"Inactivate":
Press 4 to play the new message during
the announcement.
"Activate":
1
Enter the remote access code
(page 40) during the announcement.
2
Press 4 to play the new message.
press #9 during the call to turn off the
new message alert by a call feature.
call, the handset redial list does not show
the record.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
40
manuals search engine
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.
Important:
R In order to operate the answering system
remotely, you must first set a remote
access code.
1
M N#306
2
To turn on remote operation, enter the
desired 3-digit remote access code.
3
MOKN a MeN
Deactivating remote operation
Press * in step 2 on "Remote access code",
page 40.
R The entered remote access code is deleted.
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts, enter
your remote access code.
3
Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 41).
4
When finished, hang up.
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
2012/12/25 16:30:13