Inserting Sd Card - Honeywell ScanPal EDA50 User Manual

1. Features of ScanPal EDA50 Enterprise Hybrid Device

Inserting SD card

22
You can use a SD card to expand the memory or to install softwares. Honeywell
recommend the using of Single Level Cell (SLC) graded SD memory card or
SDHC memory card in order to achieve optimum performance and durability.
Note: format the memory card when you use it for the first time.
1. Turn off the terminal.
2. Press down the battery cover safety button to move the lock to the unlock
position at right;
3. Open the battery cover with the battery cover buckle handle;
4. Pull out the battery (First open the battery connector side, then pull out the
battery)
5. Insert the Micro SD card to SD card slot until it taps;
6. Insert the battery (Insert the non-connector side first, then press the battery
down to establish connection between the battery and the phone)
7. Press down the battery cover (Insert the connector side first, then press the
battery cover down);
8. Press down the battery cover safety button to move the battery cover safety
lock to the lock position at left;
9. Press down the battery cover and slide the battery cover buckle handle to
lock it.
SD Card Slot
SD Card
ScanPal EDA50 Enterprise Hybrid Device User Guide