Bluetooth Communication; Pairing With A Bluetooth-Enabled Device - Honeywell ScanPal EDA50 User Manual

6. Terminal configurations

Bluetooth communication

Pairing with a Bluetooth-enabled device

62
EDA50 supports Bluetooth communication, allowing users to get connectted
with other Bluetooth-enabled devices.
Before searching for and connectting to other Bluetooth-enabled devices, users
must enable the Bluetooth radio. By default, Bluetooth radio is disabled.
Bluetooth radio can be restored to its current state by system resetting. If users
have reset the system data, they must re-establish the paired devices. Bluetooth
status is displayed on the System Icon bar.
To connect to a Bluetooth-enabled device, users should enable Bluetooth radio
first and then choose the device from the detected device list.
1. Enter Application Settings screen.
2. If Bluetooth switch is off, slide it on.
3. Tap Bluetooth to display avaiable Bluetooth-enabled device list.
ScanPal EDA50 Enterprise Hybrid Device User Guide