Operation
LEDs and Buttons
LEDs and Buttons
Status LEDs
The status LEDs are located on the router module's cover plate.
Hub (LAN) Router Tx
WAN Net Fail
Hub (LAN) Router Rx
WAN Rx
Hub (LAN) Net Fail
WAN Tx
Router Self-test
Router Fault
SNMP Mgt (module) Fault
Figure 3-1. Status LEDs
For information about what is indicated by each of these LEDs, refer to
table 3-1, "Status LEDs", on the next page. For information on trou-
bleshooting using these LEDs, refer to chapter 4, "Troubleshooting".
3-2