Data Communications Specifications And Certifications; Third-Party Products - HP J2600A Installation Manual

Data Communications Specifications and
Certifications
The WAN port (with the appropriate cable) meets the following
specifications:
RS-232 and CCITT V.24/V.28, synchronous
EIA RS-422/449 and CCITT V.36
CCITT X.21
CCITT V.35
ISO 2593 and MIL-C-28747
The HP J2628A AdvanceStack Router 210 Module is approved under
Approval Number NS/G/1234/J/100003 for indirect connection to public
telecommunication systems within the United Kingdom.
Hewlett-Packard has applied for certification for use on X.25 packet-
switching networks. Certifications were still in progress at the time of
printing. Please contact your local HP representative for latest certifica-
tion status.

Third-Party Products

Hewlett-Packard designed the HP Router 210 Module to operate with
industry-standard hardware and software products.
HP has conducted limited testing with certain non-HP products to
determine compatibility with the HP routers described in this guide.
Please contact your HP-authorized LAN dealer or HP representative for
the current list of tested products.
HP relies in part upon information from the suppliers of non-HP
products and makes no warranty, expressed or implied, with respect to
the operation of these products or their compliance with worldwide
regulatory requirements. HP advises customers to conduct independent
examination to determine suitable levels of compatibility for the
customer's individual needs.
For information about the hardware and software/firmware warranties
applicable to the HP Router 210 Module, refer to the warranty card
shipped with the router module.
Specifications
B-3