Show Spanning-Tree Statistics Instance Interface - Allied Telesis AT-DC2552XS/L3 Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE STATISTICS INSTANCE INTERFACE
show spanning-tree statistics instance
interface
Overview In version 5.4.5-2.x, this option is not supported on DC2552XS switches.
This command displays BPDU (Bridge Protocol Data Unit) statistics for the specified
MST (Multiple Spanning Tree) instance and the specified switch port associated
with that MST instance.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
Syntax show spanning-tree statistics instance <instance> interface
<port>
Mode Privileged Exec
To display BPDU statistics for MST instance 2, interface port1.0.2, use the
Example
command:
awplus#
port1.0.2
C613-50079-01 REV A
Guide.
Parameter Description
<instance>
Specify an MSTP instance in the range <1-15>.
<port>
The port to display information about. The port may be a switch port
(e.g. port1.0.4), a static channel group (e.g. sa2), or a dynamic
(LACP) channel group (e.g. po2).
show spanning-tree statistics instance 2 interface
Command Reference for AT-DC2552XS/L3
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
"Getting Started with AlliedWare Plus" Feature Overview
551