Sony Trinitron PVM-2054QM Operating Instructions Manual page 6

ffl
^ AC IN
LINE A
VIDEO
IN OUT
s
LINE B
VIDEO
IN OUT
LIKfE C
RGB/COMPONENT EXT SYNC
(The A/y mark indicates automatic termination.)
[T] AC IN socket
Connect the supplied AC power cord to this socket and
to a wall outlet.
\2\ LINE A, LINE B connectors
Two groups (A and B) of line input connectors for the
composite video and audio signals and their loop-
through output connectors.
To monitor the input signal fed through these
connectors, keep the LINE/RGB selector in the LINE
position (light off) and press the A/RGB or
B/COMPONENT selector (light on) on the front panel.
VIDEO IN (BNC)
Connect to the video output of a video equipment, such
as a VCR or a color video camera. For a loop-through
connection, connect to the video output of another
monitor.
VIDEO OUT (BNC)
Loop-through output of the VIDEO IN connector.
Connect to the video input for a VCR or another
monitor.
When the cable is connected to this connector, the
75-ohms termination of the input is automatically
released, and the signal input to the VIDEO IN
connector is output from this connector.
AUDIO IN (phono jack)
Connect to the audio output of a VCR or to a
microphone via a suitable microphone amplifier. For a
loop-through connection, connect to the audio output of
another monitor.
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN jack. Connect to
the audio input of a VCR or another monitor.
[3] LINE C connectors
Y/C IN (4pin m i n i DIN)
Connect to the Y/C separate output of a video camera,
VCR or other video equipment.
Y/C OUT (4pin m i n i DIN)
Loop-through output of the Y/C IN connector. Connect
to the Y/C separate input of a VCR or another monitor.
When the cable is connected to this connector, the
75-ohms termination of the input is automatically
released, and the signal input to the Y/C IN connector is
output from this connector.
AUDIO IN (phono jack)
Connect to the audio output of a VCR or a microphone
(through a suitable microphone amplifier).
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input of a VCR or another monitor.