Turn Signal Switch; High Beam Switch; Passing Light Switch - SSANGYONG MUSSO Owner's Manual

3–18 INSTRUMENTS AND CONTROLS

TURN SIGNAL SWITCH

Move this lever up to the stop position to
signal a right turn.
Move this lever down to the stop position to
signal a left turn.
When the turn is completed, the signal will
cancel and the lever will return to the nor-
mal position.
When changing lanes, move the switch part
way and hold it there. When released, the
switch will spring back to the normal posi-
tion.
CAUTION
Battery will discharge.
Do not leave the lights on while en-
gine is off.

HIGH BEAM SWITCH

To turn on the high beam headlights push the
lever towards the instrument panel with the
low beam headlights on.
The headlight high beam indicator light in the
instrument panel comes on when the head-
lights are on high beam.
For low beam headlights, pull the lever back
towards the steering wheel to the normal
position.
NOTE
The light switch must already be in
the position.

PASSING LIGHT SWITCH

To flash the high beam, pull the lever to-
wards the steering wheel and release it.
The lever will return to the normal position
when released.
The high beam headlights stay on as long
as you hold the lever.