Safety Instructions; Loading The Tool - Bostitch SL1838BC-E Original Instructions Manual

SAFETY INSTRUCTIONS

© Stanley Bostitch
m IMPORTANT READ CAREFULLY: It is important that all operators read and understand all
sections of this Tool Technical Data manual and the separate Safety and Operating Instruction
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
Manual which come with this tool. Failure to do so could result in you or others in the working
compliance for the products.
area to be seriously injured.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
m WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than defined
rien que les produits soient conformes aux normes CE.
in EN166 should be used. However all aspects of operators work, environment and other type/s of machinery
being used, should also be considered when selecting any personal protection equipment. Note: Non-side
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
shielded spectacles and face shields alone do not provide adequate protection.
die CE-Richtlinien für Produkte.
m WARNING! To prevent accidental injuries:
l Never place a hand or any other part of the body in fastener discharge area of tool.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
l Never point tool at yourself or anyone whether it contains fasteners or not.
zeggen dat de producten voldoen aan de CE-vereisten.
l Never engage in horseplay.
l Never pull the trigger unless the nose is directed towards the work.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
l Always handle the tool with care.
produkterne.
l Use the Bostitch tool only for the purpose for which it was designed, such as: fastening sheet material, thin
plastics waterproof materials and membranes to timber.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
These tools should not be used for anything other than wood to wood applications.
yhdenmukaisuutta.
l Do not pull the trigger or depress the trip mechanism whilst loading the tool.
l To prevent accidental actuation and possible injury, always disconnect air supply.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος
1. Before making adjustments. 2. When servicing the tool. 3. When clearing a jam. 4. When tool is not in use.
εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
5. When moving to a different work area, as accidental actuation may occur, possibly causing injury.
l Read the additional Safety & Operating instructions booklet before using tool.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
l Do not use oxygen and combustible gases as an energy source for pneumatically operated tools.
conformità CE per i relativi prodotti.
l The operation of this tool can cause sparks and act as a source of ignition for flammable fuels and gases.
These tools feature moveable parts including the jaw to close the fasteners. Make sure only the material to be
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
fastened is placed within the jaws of this tool to avoid the danger of crushing of fingers. Keeps hands clear at
merking for produktet.
all times to prevent serious injury.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
CAUTION: Keep hands and fingers away from the jaw of the tool at all times especially when tool is
conformidade com a CE para os produtos.
connected to an air source as the jaw could move and/or a fastener could be ejected unexpectedly, which
could cause injury to yourself or others in the work area.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.

LOADING THE TOOL

Loading the staples:
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
1. Pull the pusher all the way back. (Fig 1a)
conformidad con las normas CE de los productos.
2. Allow the pusher to rotate down into notch in magazine. (Fig 1b)
3. Load the staples. (Fig 2a)
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
4. Slide the staples all the way forward. (Fig 2b)
stanowią deklaracji zgodności CE prezentowanych produktów.
5. Pull back on the pusher. (Fig 3a)
6. Allow pusher to rotate up out of notch in magazine. (Fig 3b)
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
7. Allow pusher to slide foreword in contact with the staples. (Fig 3c)
stanowią deklaracji zgodności CE prezentowanych produktów.
Adjustments for short staples: NOTE: Only use the Short Staple Guide to drive staples from 12mm to 19mm long.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
1. Place the Short Staple Guide on the tool magazine. (Fig 4)
výrobky.
2. Use the provided screw (MSC4070-8) to attach the Short Staple Guide to the magazine. (Fig 5)
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
GB