Hitachi CP-WU5500 User Manual page 80

SCREEN menu
Item
SOURCE NAME
(continued)
TEMPLATE
(continued on next page)
80
(6) The current name will be displayed
on the first line. Use the ▲/▼/◄/►
buttons and the ENTER or
select and enter characters. To erase 1
character at one time, press the RESET
button or press the ◄ and
at the same time. Also if you move the
cursor to DELETE or CLEAR ALL on
screen and press the ENTER or
button, 1 character or all characters will
be erased. The name can be a maximum
of 16 characters.
(7) To change an already inserted character,
press the ▲ button to move the cursor to
the first line, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or
Then, follow the same procedure as described at the item (6)
above.
(8) To finish entering text, move the cursor to the OK on screen
and press the ►, ENTER or
name without saving changes, move the cursor to the CANCEL
on screen and press the ◄, ENTER or
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the ENTER) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the MY BUTTON
allocated to the TEMPLATE function is pressed (84).
TEST PATTERN ó DOT-LINE1 ó DOT-LINE2 ó DOT-LINE3

STACK ó MAP2 ó MAP1 ó CIRCLE2 ó CIRCLE1 ó DOT-LINE4
You can turn a map upside down and scroll it horizontally when
MAP1 or MAP2 is selected. To invert or scroll the map, display
the guidance by pressing the RESET button on the remote three
seconds or more when MAP1 or MAP2 appears.
Description
button to
button
button, the character is selected.
button. To revert to the previous
button.
