Hitachi CP-WU5500 User Manual page 65

Item
DIGITAL RANGE
COMPUTER IN
FRAME LOCK
(continued on next page)
The digital range of HDMI
MHL, HDMI 2 and HDBaseT
CP-WU5505/CP-WX5505
CP-X5555
(1) Use the ▲/▼ buttons to select the port to be set.
(2) Use the ◄/►buttons to select the digital range.
AUTO ó NORMAL ó ENHANCED
AUTO: automatically sets the optimum mode.
NORMAL: sets the suitable mode for DVD signals. (16-235)
ENHANCED: sets the suitable mode for computer signals. (0-255)
• If the contrast of the screen image is too strong or too weak, try
finding a more suitable mode.
The computer input signal type for COMPUTER IN port can be set.
Use the ◄/► buttons to select the
computer input signal type.
AUTO ó SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
Set the frame lock function on/off for each port.
CP-WU5505/CP-WX5505
CP-X5555
(1) Use the ▲/▼ buttons to select the input ports.
(2) Use the ◄/► buttons to turn the frame lock function on/off .
ON ó OFF
• This item can be performed only on a signal with a vertical
frequency of 49 to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
Description
TM
/MHL input signals from the HDMI 1/
TM
ports can be set.
CP-WU5500/CP-WX5500
CP-WU5500/CP-WX5500
INPUT menu
CP-X5550
CP-X5550
65