Hitachi CP-WU5500 User Manual page 101

Item
MY TEXT
DISPLAY
MY TEXT
WRITING
(continued on next page)
(1) Use the ▲/▼ buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the ► or
ENTER button to display the MY TEXT DISPLAY
on/off menu.
(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY
on/off menu to select on or off.
ON ó OFF
When it is set ON, the MY TEXT will be displayed
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
(1) Use the ▲/▼ buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the ►
button. The MY TEXT WRITING dialog
will be displayed.
(2) The current MY TEXT will be displayed
on the first 3 lines. If not yet written, the
lines will be blank.
Use the ▲/▼/◄/► buttons and the
ENTER or button to select and enter
characters. To erase 1 character at one
time, press the RESET button or press
the ◄ and button at the same time.
Also if you move the cursor to DELETE
or CLEAR ALL on screen and press the
ENTER or button, 1 character or
all characters will be erased. The MY
TEXT can be input up to 24 characters
on each line.
(3) To change an already inserted
character, press the ▲/▼ button to
move the cursor to one of the first 3
lines, and use the ◄/► buttons to
move the cursor on the character to be
changed.
After pressing the ENTER or
follow the same procedure as described at the item (2) above.
(4) To finish entering text, move the cursor to the OK on screen and press
the ►, ENTER or
saving changes, move the cursor to the CANCEL on screen and press
the ◄, ENTER or
•
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
Description
button, the character is selected. Then,
button. To revert to the previous MY TEXT without
button.
SECURITY menu
101