Hitachi CP-WU5500 User Manual page 72

SETUP menu
Item Description
Using ▲/▼ buttons switches the standby mode setting between
NORMAL and SAVING.
NORMAL ó SAVING
• When SAVING is selected, the RS-232C communication control
except to turn the projector on and the network function are disabled
while the projector is in the standby mode. If the COMMUNICATION
TYPE in the COMMUNICATION menu is set to NETWORK
BRIDGE, all of the RS-232C commands are disabled (90).
• When SAVING is selected, STANDBY OUTPUT is invalid.
STANDBY MODE
• When SAVING is selected, the HDMI Link and HDBaseT™
functions are disabled while the projector is in the standby mode.
• This function is available only when OFF is selected for STACK
MODE. (OPTION menu > SERVICE > COMMUNICATION >
STACK).
• When SAVING is selected, SCHEDULE function (Ex. POWER-
ON) at STANDBY MODE will not be operated.
• When SAVING is selected, the MHL STANDBY PWR. menu
cannot be operated and MHL power feeding is unavailable with
67
standby mode( ).
Selects image level and region that are desired to be corrected, and
adjusts Color Balance.
COLOR
UNIFORMITY
Divides the screen into 9 regions and adjusts gain of R/G/B of each
region.
(continued on next page)
72