SCAN Andersen 4-5 Installation And Operating Instructions Manual page 39

Fig. 10
1. Remove the cast iron cover (Fig. 10 - 1) from inside the burn
chamber.
2. Fit the cast iron cover in the top outlet hole.
Fig. 11
1. Attach the loose smoke outlet (Fig. 11-1) which is inside the
ash pan to the outlet using the retaining clips and screws
from the service package.
For re-installation follow the same procedure in the opposite
sequence.
4.8 Fitting the ash lip
Fig. 12
1
1. Secure the ash lip in place (Fig. 12 - 1) using the screws
4.9 Handle
If you want a fi rm handle, you can mount the long screw (M5x20)
that you will fi nd in the service bag. The vertical position of the
handle can be adjusted by the pointed screw on the locking
device.
2
provided (Fig. 12 - 2).
ENGLISH
1
39