Advanced Setup; Advanced - D-Link DCS-4705E User Manual

Section 3: Configuration
Enabling Video Motion will allow your camera to use UPnP to automatically set up port forwarding on your router. After making any changes, click
the Save button to save your changes.
Enable UPnP
Enabling this setting allows your camera to be configured as a UPnP device
Presentation:
on your network.
Enable
Enabling this setting allows the camera to add port forwarding entries into
UPnP Port
the router automatically on a UPnP capable network.
Forwarding:
Forwarding
If UPnP Port Forwarding is enabled, you can set which port to use for
Port:
forwarding.
Forwarding
If UPnP Port Forwarding is enabled, this will show the UPnP Port Forwarding
Status:
status.
D-Link DCS-4705E User Manual

Advanced Setup

Advanced

UPnP
48