Changing The Tear Position - Microplex iF60C Operator's Manual

86 Printer Operation and Menu Functions
_______________________________________________________________________________________________

4.7. Changing the Tear Position

Tear mode is on at normal mode and off at continuous mode.
Tear position indicates the distance between the tear unit and the cutter.
The value is adjustable, the standard value is 57 mm.
1. On the operation panel, push [SETTINGS AND MAINTENANCE].
2. Select [SETTINGS].
3. Select [SETTINGS].
4. Select [TEAR MODE].
SubMenu SETTINGS\TEAR MODE:
_______________________________________________________________________________________________
MICROPLEX Operator's Manual MICROPLEX iF60C Edition 1.0