Repacking - Microplex iF60C Operator's Manual

_______________________________________________________________________________________________

7.3. Repacking

The Printer is shipped with special packing material and fixing measures.
It is recommended to store the boxes and those packing materials.
In case of further shipping or returning of the products they
must be repacked in the original way in order to avoid
damaging during transportation.
The following list gives you an overview of the working steps necessary
for repacking. Pay attention to the notices located on the products and
the hints given in the Service Manual as well.
!
If you are not familiar with any of the working steps please ask your
service engineer or your supplier!
!
Repack all items in their original packing material and ship them in the
original boxes.
_______________________________________________________________________________________________
MICROPLEX
• Before moving the printer, you have to prepare the printer!
• Please read section 4.9.3 Replacement and Transport and
chapter 7 Measures for Transport and Shipping.
• To transport the printer with vehicles or planes, the full
preparation is required. See section 7.2.
• Remove the printer's optional devices
(for example: stacker ...).
• Lock all moveable parts of the printer (use all original transport
safety devices, adhesive fasteners and so on).
Operator's Manual MICROPLEX iF60C
Measures for Transport and Shipping 163
Edition 1.0