Olympus EVOLT E-300 Advanced Manual page 74

Drive mode
Using the remote control
1
Mount the camera on a tripod or place
it on a stable, flat surface.
2
Point the remote control at the remote
control receiver on the camera and
press the shutter button on the remote
control.
● When
is selected: The focus and exposure
4
are locked, the remote control lamp blinks
and the picture is taken.
When is selected: The focus and exposure
are locked, the remote control lamp blinks
and the picture is taken after approximately 2
seconds.
Transmitted signal effective area
Point the remote control at the remote control receiver of the camera within the
effective area as shown below.
Powerful lighting such as direct sunlight, fluorescent light or devices emitting
electrical or radio waves could narrow the effective area.
Remote
control
74
Approx. 5m (16.4 ft.) (indoor)
Approx. 3m (9.8 ft.) (outdoor)
Remote control lamp
Remote control receiver
Remote control receiver
15°
15°
Camera