Using the built-in flash
If you shoot a subject from as close as 1 m using a lens that is wider than 14 mm
(equivalent to 28 mm on a 35 mm film camera), the light emitted by the flash may
produce a vignette effect.
P A S M
Available modes
1
Press the
(flash) switch to raise the
flash.
2
Press the shutter button halfway.
● The
(flash stand-by) mark lights when the
flash is ready to fire. If the
blinking, the flash is charging. Wait until
charging is complete.
3
Press the shutter button all the way
down (fully) to take the picture.
mark is
(flash) switch
Viewfinder
Flash stand-by mark
Flash shooting
4
59