Installing Olympus Master - Olympus EVOLT E-300 Advanced Manual

Installing OLYMPUS Master

Identify the OS on your computer before installing the software.
For the latest information on compatible operating systems, visit the OLYMPUS
web site (http://www.olympus.com).
System requirements
Windows
OS
CPU
RAM
HD space
Interface
Monitor
● Only pre-installed operating systems are supported.
● To install OLYMPUS Master on a computer running Windows 2000 Professional or
Windows XP, login as a user with administrator privileges.
● QuickTime 6 and Internet Explorer or later must be installed on the computer
beforehand.
● For Windows XP, Windows XP Professional/Home Edition is supported.
● For Windows 2000, only Windows 2000 Professional is supported.
● For Windows 98SE, a USB driver will be automatically installed.
Macintosh
OS
CPU
RAM
HD space
Interface
Monitor
● If your Macintosh has no built-in USB port, its functionality may not be guaranteed when
the camera is connected to the computer via USB.
● Quick Time 6 or later and Safari 1.0 or later must be installed on your computer.
● Be sure to remove the card (drag and drop it onto the Trash icon) first before performing
the following procedures. If you skip these procedures, the computer may not function
properly, requiring you to restart it.
– Unplug the cable connected between the camera and computer.
– Turn off the camera.
– Open the camera's card compartment cover.
Windows 98SE/Me/2000 Professional/XP
Pentium III 500 MHz or higher
128 MB or more (256 MB or more recommended)
300 MB or more
USB port
1024 x 768 pixel or more, minimum 65,536 colors
Mac OS X 10.2 or later
Power PC G3 500 MHz or higher
128 MB or more (256 MB or more recommended)
300 MB or more
USB port
1024 x 768 pixel or more, minimum 32,000 colors
Using the provided OLYMPUS Master software
Note
Note
10
159