If correct focus cannot be obtained
Subjects that are difficult to focus on
Under the following conditions, AF may not work properly. Take a picture using
~
focus lock (
~
(
P. 78).
2
The AF confirmation mark
blinks. The subject cannot
be brought into focus.
Subjects with low contrast
The AF mark stays lit,
but the subject cannot
be brought into focus.
Subjects with different
distances
If this happens, focus on a high-contrast object the same distance away as the
intended subject, recompose your shot and then take the picture. If the subject
has no vertical lines, hold the camera vertically and adjust the focus, then
return the camera to the horizontal position to take the picture.
32
P. 30), manual focus (
Subjects in excessively bright
light in the center of the frame
Fast-moving subjects
~
P. 83), or by selecting an AF frame
The subject is not
positioned within the AF
frames.
Subject with repeated
patterns